mm22nw
Junior Member
Posts: 24
|
Post by mm22nw on Apr 20, 2013 8:37:23 GMT -5
I'm making good progress replacing my stator. "Homemade" rotor holder worked very well. Replacement stator wiring was not pre-wired to the 3 prong connector that attaches to the voltage regulator.
>>Does the arrangement of the 3 wires from the stator to the connector 'matter'?
TIA
Mike
|
|
|
Post by grizld1 on Apr 20, 2013 21:15:56 GMT -5
Nope. Just hook up any stator AC output wire to any rectifier diode wire.
|
|