|
Post by wildcard on Jun 29, 2012 9:55:01 GMT -5
i have ordered 2 wiring harnesses off ebay for my 1974 TX/SX 650 and neather one has the 3 prong ignition plug.am i missing something here?
|
|
|
Post by grizld1 on Jun 30, 2012 22:56:45 GMT -5
Possibly so. The "3-way ignition plug" isn't obvious in the stock harness. What you have is a pair of wires, one for each cylinder--usually one orange and one gray, but colors vary--with a bullet connector on one end and a double female connector on the other. The wires themselves are covered by the harness sheathing, so the connection between the bullet on one end and the double female connector on the other isn't obvious until you inspect for continuity with a meter.
|
|