|
Post by my100kmi650 on Mar 5, 2009 1:34:05 GMT -5
Man, is has been tough trying to get setup on the forum. After about a dozen tries. It appears that the user name needs to start with a letter and not a number( no message ). Now I can't post on the engine forum. When I go to the engine forum the site changes me to a guest. Not sure what's up. Will try tomorrow.
|
|
|
Post by G Man on Mar 5, 2009 8:56:54 GMT -5
Man, is has been tough trying to get setup on the forum. After about a dozen tries. It appears that the user name needs to start with a letter and not a number( no message ). Not sure what was giving you the trouble, however a username can start with a number if desired. Take a look at the member list. The whole first page (approx 29 members) usernames all start with a number. I guess you ironed that out as I notice you were able to answer a post there? If you have any more issues, just ask. I am sure you will enjoy the forum and find it very easy to use. Take care, G Man
|
|
|
Post by my100kmi650 on Mar 17, 2009 15:33:31 GMT -5
Hi My initial trouble was because of the privacy settings in my browser. The registration dosen't have a very good feedback about problems. It just says incorrect and fill it out again. Well, enough of that now I have another problem. I started a post in engines named half a dozen questions. I can't reply, at the top it says i am a guest but if I back up to engines it shows me logged in.
|
|
|
Post by my100kmi650 on Mar 17, 2009 16:17:37 GMT -5
Now it is working OK. I will continue to give feedback here.
|
|