|
|
Post by crusher on Dec 3, 2007 8:52:30 GMT -5
Just ordering some parts online and i notice that they list diferent barrels for a 447 and a 533. I have a spare set of barrels to go on my 447 engine but don't know what they came off, how can i tell what they are. Im presuming the strokes are diferent.
Thanks..
|
|
|
|
Post by grizld1 on Dec 3, 2007 9:37:40 GMT -5
Correct, the 533 has longer rods. Measure cylinder heights and compare..
|
|
jack
Junior Member
Posts: 16
|
Post by jack on Dec 3, 2007 20:33:11 GMT -5
strokes are exactly the same for both models,the 533 using a piston with a higher piston pin position to compensate using the longer rod for correct deck height............Jack
|
|
|
|
Post by grizld1 on Dec 3, 2007 21:48:04 GMT -5
Hey, Jack, good to see ya here! Thanks for the correction--I'd always assumed the longer rod made for a longer stroke, and ya know what they say about assumption....
|
|
|
|
Post by crusher on Dec 4, 2007 11:11:00 GMT -5
Thanks Jack. Not got the original pistons so i'l fit my spares without rings for now and check the height with my spare barrel.
|
|
